IR DR MOHD DANIAL IBRAHIM

Teaching and Learning Activities

Undergraduate Students Supervisions:
 
1. Saad Salahuddin Musa (2015), Thesis Topic: “Reducing Energy Loss in Air Distribution System of HVAC,” BEng. (Mechanical), ongoing.

2. Siti Nur Azizah Amran (2015), Thesis Topic: “Drag Reduction on Surfaces Inspired by Shark Skin (Dermal Denticles),” BEng. (Mechanical), ongoing.

3. Nurul Aufa Abdul Majid (2015), Thesis Topic: “Concept of Passive and Active Chiller Beam in HVAC,” BEng. (Mechanical), ongoing.

4. Norliza Marusman (2015), Thesis Topic: “Characterization of Fluid Dynamic Bearings in High Precision Engineering Eguipments,” BEng. (Mechanical), ongoing.

5. Nordin Abu Bakar (2015), Thesis Topic: “Improvement of Manufacturing Quality Problems in Diecasted Parts Used in Vehicles,” BEng. (Mechanical), ongoing.

6. Valeri Semunau ak Jeremiah (2015), Thesis Topic: “Super-hydrophobic Surfaces on Lotus,” BEng. (Mechanical), co-supervisor, ongoing.

7. Syafina Zainal (2015), Thesis Topic: “Self-sustained Auto Cleansing Solar Panel for Rural Areas,” BEng. (Mechanical), co-supervisor, ongoing.

8. Yana Shaheera Yunos (2014), Thesis Topic: “Non-Newtonian Blood Flow Behaviour in Microchannels-Application in Medical Industry,” BEng. (Mechanical), ongoing.  

9. Wong Lee Kwang (2014), Thesis Topic: “Study of the Whale Tip Blade Design Integrated with Macro Dimples on Boat Propellers,” BEng. (Mechanical), ongoing.

10. Mohd Rahmat A Rahman (2014), Thesis Topic: “Mold Designs in Diecasting with Introduction of Carbides as Elements to Improve Production Rate,” BEng. (Mechanical), ongoing.

11. Nur Farhana Abdul Kadir (2014), Thesis Topic: “Effects of Spring Inspired Blade Design on Wind Turbine Performance,” BEng. (Mechanical), ongoing.

12. Herbert Ian Bin Juhan (2014), Thesis Topic: “Bladeless Fan Inspired by Noise Reduction Technology,” BEng. (Mechanical), ongoing.

13. Siti Nazirah Abdullah (2013), Thesis Topic: “Whale-inspired Blade Design of a Contra-Rotating Tidal Turbine,” BEng. (Mechanical), completed.

14. Nur Atiqah Nadia Remmy Iskandar (2013), Thesis Topic: “Durable Hybrid Powered White Pepper Retting Machine Integrated with Crude Enzymatic Solutions,” BEng. (Mechanical), completed.

15. Kelvin Wong (2013), Thesis Topic: “Study of Blood Flow Characteristics in the Micro-needle Designs Inspired by Mosquito’s Fascicle,” BEng. (Mechanical), completed.

16. Tan Wai Kong (2013), Thesis Topic: “Thermofluidic Effects of Actuator Arm Designs in an Ultra High Speed 3.5” Hard Disk Drives,” BEng. (Mechanical), completed.

17. Siti Zaharah Ibrahim (2012), Thesis Topic: “Effect of Macro-surface Modification of Subsonic Flow on Airplane Winglets,” BEng. (Mechanical), completed.

18. Siti Noor Haizum Semait (2012), Thesis Topic: “Minimizing Pain Stresses Using QuadrupleTip Micro-Needles – An Application From Mosquito Syringes,” BEng. (Mechanical), completed.

19. Cathy Ambrose (2012), Thesis Topic: “Mobile Automatic White Pepper Retting Machine Integrated with Enzymatic Solutions,” BEng. (Mechanical), completed.

20. Chew Chang Kit (2012), Thesis Topic: “S-shaped Actuator Arm for HDD’s Component,” BEng. (Mechanical), completed.

21. Simon Wong (2012), Thesis Topic: “Aerodynamic Properties Improvements of Surfaces,” BEng. (Mechanical), completed.

22. Melissa Elimy Mullen (2012), Thesis Topic: “Newtonian and Non-newtonian Flow Characteristics for a Modified Spiral Thrust Bearing,” BEng. (Mechanical), completed.

23. Patricia Patrick (2012), Thesis Topic: “3-Dimensional Preliminary Topography of UNIMAS for Future Evaluations of Wind Flow Characteristics,” BEng. (Mechanical), completed.

24. Ong Jin Ho (2011), Thesis Topic: “Identifications and/or Improvements of Static and/or Dynamic Characteristics and Performance of HDDs,” BEng. (Mechanical), completed.

25. Colette Tami (2011), Thesis Topic: “Mechanism of Blood Withdrawal from Mosquitoes Syringe,” BEng. (Mechanical), completed.

26. Jong Kong Lip (2011), Thesis Topic: “Aerodynamic Properties Improvements of Surfaces,” BEng. (Mechanical), completed.

27. Hii Hiong Hung & Marphy Ak Hendary (2011), Thesis Topic: “Designing an Anaerobic Digester of a Biological Waste Recovery System,” BEng. (Mechanical), completed.

28. Awang Rahim Osman (2008), Thesis Topic: “Fundamental Study on the Mechanism of Blood Withdrawal of Mosquito,” BEng. (Mechanical), completed.

29. Muhammad Tasnim Abd. Hamid (2008), Thesis Topic: “Investigation on Ideal Shape and Optimal Design of Golf Balls,” BEng. (Mechanical), completed.

  

Undergraduates Students Co-supervisions (Tokai Univ., Japan)

Year 2009
1. Stabilization Method of Small Bore Journal Bearing Utilizing Starved Lubrication (Experimental Study on Vibration Characteristic Under Various Loading Condition) - Tonoike, Tsukidate, BEng. (Mechanical), completed.

2. Stabilization Method of Small Bore Journal Bearing Utilizing Starved Lubrication (Stabilization Method by Control of Supplied Oil Quantity ) - Kobayashi, BEng. (Mechanical), completed.

3. Experimental Study on Small Bore Journal Bearing Supporting a Left-Right Asymmetrical Shaft - Shimizu, BEng. (Mechanical), completed.

4. Study of Flying Height Measurement of Air Thrust Bearings Considering Thermal Effects - Onai, Yamamoto, BEng. (Mechanical), completed.

5. Vibration Response Characteristics of Fluid Dynamic Bearing for Small Size Spindle Motors - Akiyama, Sato, Otsuka, BEng. (Mechanical), completed.

 
Year 2010

6. Stability Experiment of Small Bore Journal Bearing Supporting a Left-Right Asymmetrical Shaft - Yabuki, Tsutsumi, BEng. (Mechanical), completed.

7. Experimental Study on Temperature of Oil in Bearing Clearance under Starved Lubrication - Kimura, BEng. (Mechanical), completed.

8. Measurement Study of Pressure Distribution of Air Thrust Dynamic Bearings - Takahashi, Iizuka, BEng. (Mechanical), completed.

9. Precision of Temperature Measurement of Thrust Air Bearing - Kurihara, Miyamoto, BEng. (Mechanical), completed.

10. Impact Response Experiment of Sliding Bearing for Small Size Spindle Motors - Take, Ikegami, Kumeta, BEng. (Mechanical), completed.

Year 2011

11. Relationship Between Starved Lubrication and Oil Temperature of Small Bore Journal Bearing - Taniguchi, BEng. (Mechanical), completed.

12. Measurement of Pressure Distribution and Load Carrying Capacity of Air Thrust Bearing Having Optimized Grooves-Harayama, Hanyu, BEng. (Mechanical), completed.

13. Impact Response Characteristics of Small Size Fluid Dynamic Bearing Spindle for 2.5" HDD - Nakajima, Hyono, BEng. (Mechanical), completed.

 

Industrial Exposures:

1. Mechanical Engineer at DRB-HICOM HICOM Diecastings Sdn. Bhd. Lot 16, Jalan Sementa 27/19, Seksyen 27, 40000 Shah Alam, Selangor Darul Ehsan, P.O.Box 7167, 40704 Shah Alam, Selangor Darul Ehsan, (3rd February 2014~current), under Casting Engineering Department and Machining Department, (Staff ID: 300124).

2.  Assistant Engineer at Andersen Takaki Bakery Co. Ltd., Hadano Plant, Japan 598-2 Aza Kubaribata Soya, Hadano City, Kanagawa Prefecture, Japan (April 2005 ~ March 2007), under Cold Storage Department.

Consultancies:

i. Pump System Optimization in collaboration with United Nations;
Client: IOI Pan-Century Oleochemicals, Pasir Gudang, Johor
 
ii. Steam System Optimization in collaboration with United Nations;
Client: RP Chemicals, Kuantan, Pahang,
 
Client: Emergy Oleochmeicals, Telok Panglima Garang, Selangor
iii. Compressed Air System Optimization in collaboration with United Nations;
Client: Spritzer, Taiping, Perak,
Client: Tasek Cement, Ipoh, Perak,
Client: Malaysian Sheet Glass, Sungai Buloh, Selangor.
 
iv. Fan System Optimization in collaboration with United Nations;
Client: HeveaBoard, Gemas, Negeri Sembilan,
Client: Malaysian Mosaics, Kluang, Johor
 
 
v. DRB-HICOM Berhad, Hicom Diecastings Sdn Bhd.
Pre-production of Mazda Japan’s Part: Bracket Shaft Assy and Power Steering Housing
Client: Mazda Motor Corporation (Japan)
Perodua Engine Timing Belt Cover Production, Oil Retainer Seal Production
Client: Perodua Engine Manufacturing
Nissan Japan (NSK) Power Steering Housing Production
Client: ZF Lenksysteme

Postgraduate Students Supervisions:

1. Yana Shaheera Yunos (2015), “Micro-needle with Micro-pump for Drug and Blood Delivery in Polygonal Structure of Microchannel,” MEng. (Mechanical), main supervisor, ongoing.

2. Wong Lee Kwang (2015), “Simulation and Experimental Study of Portable and Non-portable Lantern Wind Turbine,” MEng. (Mechanical), main supervisor, ongoing.

3. Mohd Rahmat A Rahman (2015), “Molten Flow Behavior in Mold Design of High Pressure Diecasting,” MEng. (Mechanical), main supervisor, ongoing.

4. Muhammad Zaidi Mohtar (2015), “Optimization of Airflow inside Biosafety Cabinet Class 2 Type A2,” MEng. (Mechanical), main supervisor, ongoing.

5. Muhammad Shukry Fasihuddin (2015), “Condition Based Monitoring: Predictive Machinery Fault Detection through Vibration Analysis,” MEng. (Mechanical), main supervisor, ongoing.

6. Khan Waheed Qamar (2014), Thesis Topic: “Development and Characterization of Ni-Free Ti-Ta-X (X=Hf, Zr, Sn) High Temperature Shape memory Alloys”, PhD. (Mechanical), co-supervisor, ongoing.

7. Nadia Austin (2014), Thesis Topic: “Evaluation of Sago Biomass Based Composite Material For 3D Printing Technology”, MEng. (Mechanical), main supervisor, ongoing.

8. Siti Zaharah Ibrahim (2014), Thesis Topic: “Macro Surface Modification for Airplane Winglets Based on Dimples and Rivets Protuberances ”, MEng. (Mechanical), main supervisor, ongoing.

9. Asliana Asmara (2014), Thesis Topic: “Invesyigation of Multiphase Oceanic Laminar-Turbulent Flow for Modified Designs Tidal Turbine Blades Surface”, MEng. (Mechanical), main supervisor, ongoing. 

10. Christopher Jantai anak Boniface (2014), Thesis Topic: “A Radiant Times Series Method for Cooling Load Calculation for Dewan Tunku Abdul Rahman (DeTAR PUTRA UNIMAS)”, MEng. (Mechanical), main supervisor, ongoing.

11. Berry Rence anak Senawi (2013), Thesis Topic: “Comparison Study of Traditional White Pepper Production with Enzymatic White Pepper Production using Pectinase from Aspergillus sp.”, MSc. (Biotechnology), co-supervisor, ongoing.


Courses taught
Undergraduate courses Taught at Universiti Malaysia Sarawak

 

Academic Year

Semester

Courses Name/Code

Credit Hours

2014/2015

Sem 1

Computational Fluid Dynamics / KNJ4302

2

2013/2014

Sem 2

Tribology / KNJ4312

2

2013/2014

Sem 1

Engineering Mathematics 1 / KNF1013

3

Engineering Mathematics 3 / KNF2033

3

2012/2013

Sem 2

Fluid Mechanics 1 / KNJ1053

3

Tribology / KNJ4312

2

Engineering Mathematics 3 / KNF2033

3

2012/2013

Sem 1

Engineering Mathematics 3 / KNF2033

3

2011/2012

Sem 2

Tribology / KNJ4312

2

2011/2012

Sem 1

Engineering Laboratory 1 / KNJ1231

1

Engineering Mathematics 3 / KNF2033

3

2010/2011

Sem 2

Tribology / KNJ4312

2

2007/2008

Sem 2

Fluid Mechanics 1 / KNJ1053

3

2007/2008

Sem 2

Engineering Laboratory IV / KNJ2261

1

2007/2008

Sem 1

Statics / KNJ1013

3

Fluid Mechanics 2 / KNJ2103

3

Engineering Laboratory III / KNJ2251

1

End User Computing / TMX1010

0

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Loading ...